60 Series - BJ60, BJ61, HJ60, HJ61, FJ60, FJ62

Sunroof Cable LH - Toyota Land Cruiser HJ60 & HJ61 - 63224-30020

12HT, 2H Harmonic Balancer / Front Crankshaft Pulley
Toyota pn:
13470-68020

Piston Set - Toyota 12HT - Alfin type with rings
Toyota pn:
13101-68020 Std
13103-68020 0.50mm
PATO320

Diaphragm, Injection Pump Governor - Land Cruiser B, 2B, 3B & 2H (w/5 speed)
22303-47010
090580-0040
090580-0041
Denso - Japan

Oil Filter - Toyota Land Cruiser 60 Series HJ60 & HJ61 w/2H or 12HT Diesel Engine
15601-68010
Union Filter

Spring, Clutch Fork Return - for use w/short slave cylinder 3B BJ40, BJ42 & BJ60 series
90506-16402
90506-16004
Toyota - Japan

Fuel Suction Tube - Land Cruiser 60 Series BJ60, BJ61, FJ60, HJ60, HJ61
Single tube pick up w/return pipe
77240-60030
Toyota - Japan

Radiator Cap - 0.9 bar, 13 psi - fits many Toyota applications -Sankei, Japan
16401-63010
16401-71010
16401-54750
Sankei - Japan

Shaft, Transfer case Output - Land Cruiser (Split Case) 08/1980 - 07/2004
36231-60021
Made in Japan

Clutch Master Cylinder - Land Cruiser 60 & 70 series with booster mounted to the outside of the firewall (2 bolt holes)
31401-60010
31401-60020
31401-60021
31401-60022
Aisin - Japan

Slave Cylinder, Clutch - Land Cruiser 3B BJ40/2, & early BJ60 - short clutch slave (w/pushrod)
31470-60050
31470-60110
Japan

10 spline Input shaft for H55F transmissions with the 2H or 12HT engine as found in HJ60, HJ61, HJ45, HJ75 etc. Replaces
33311-60121

Taiyo Kiko Mfg Ltd. - Made in Japan

Extended Oil Pump Pressure Relief Valve - Toyota 2H & 12HT
Used to solve problems with oil pressure spikes due to the original valve sticking in its bore due to wear.
Replaces
15131-22010 - valve
ORVTO300A

3B & 13BT Water Pump - later models
Land Cruiser BJ60, BJ70, BJ71, BJ73, BJ74, BJ75 & related vehicles with late model 3B engines.
Toyota pn: 16100-59105
Made in Japan

Glow Plug - 10.5V (12V manual/slow glow systems)
Toyota Land Cruiser BJ60 3B, HJ60 2H in General Markets
19850-68010

Air Filter, Land Cruiser - Diesel models 40, 60, 70 & 80 series
17801-68020
17801-68030
Wix Filter

For front and rear locking hubs, drive plates, and rear full floating axle shafts that use 8.0mm hub studs. Hub Stud Kit:
1x 8x1.25mm Stud
1x 8x1.25mm Nut
1x 8mm Lock Washer
1x Cone Washer

Toyota pn: 90116-08325
Made in Japan by Joint Fuji

Gasket, Turbo Turbine Outlet Elbow - Toyota CT26 - 1HDT
Toyota pn:
17279-17020
17279-17010
Toyota - Japan

Cone Washer, 8mm for front & rear hub studs. Land Cruiser, Hilux etc. Toyota pn:
42323-60010

Toyota - Japan

8708.29

Tie Rod End LH/RH - 60, 70, 80 Series - 23mm RH thread
**Read the product description for applications
45047-69085
Sankei 555 - Japan

Front Outer Brake Hose - Land Cruiser 60 & 70 Series (7.25" or 18.5cm OAL)
96940‑39855
Toyota - Japan

Brake Hose, Rear - Land Cruiser 60, 70 Series (OME lifted) • 17.5" long, M10x1 fittings
96940-34405
96940-34406

Toyota 3B Diesel - Full Engine Gasket Kit up to 07/1988
04111-58017
04111-58011
04111-58012
Aftermarket - Taiwan

Universal Joint - Land Cruiser 40, 55, 60, 70 & 80 Series. 64mm u-joint that was used from 1974 (with the introduction of the 4 speed transmission)
04371-36030
04371-60210
Toyota - Japan