Bearing, Differential Carrier - Toyota Land Cruiser high pinion 8” E-Locker RH side 90366-75001

Pinion Seal for Land Cruiser, Hilux, 4Runner 9.5” & 8” differentials.This seal is also used as a Transmission and Transfer Case output seal in some applications.

38x74x11-19mm Poly seal

If you have a crush sleeve style differential, it is a requirement

Diff Bearing Kit - HP 8" w/Locker
- Land Cruiser High Pinion 8" w/Factory Locker

Diff Bearing Kit - 9.5" Land Cruiser - 50mm Carrier Bearings & Crush Sleeve (1990-On)

Diff Bearing kit 9.5" w/Locker
Land Cruiser with Factory Locker (e-locker, cable locker) 30mm pinion

Diff Bearing kit - 8" High Pinion no-locker Land Cruiser (1990 & on)
Koyo bearings in kit

Swivel Hub/Knuckle Kit - Land Cruiser 70 Series High Pinion 8" 08/1989-07/1999
DT-SH5

Swivel Hub/Knuckle Kit for Land Cruiser 80 Series & Lexus LX450 with the 8” high pinion live axle front end:
FJ80, FZJ80, HDJ80, HDJ81, HZJ80, HZJ81, LX470

Pinion Seal for Land Cruiser, Hilux, 4Runner 9.5” & 8” differentials.This seal is also used as a Transmission and Transfer Case output seal in some applications.

38x74x11-19mm Polyurethane seal

If you have a crush sleeve style differential, it is a req

Inner Axle Seal for Land Cruisers with the 8” high pinion front axle. 35x50x9.5mm
90310-35010
90310-35005
NAK - aftermarket

Crush Sleeve for rebuilding the Toyota 8” Rear and also the 8” High Pinion Differentials with or without E-Locker. Any time you loosen or remove the pinion nut, thereby releasing tension the crush sleeve, a new one must be put in to place to ensure the co