Differential Bearing kit, Front - Land Cruiser High Pinion 8" (1990 & later) 27 spline - w/Crush Sleeve

Differential Bearing kit, Front - Land Cruiser High Pinion 8" (1990 & later) - w/Crush Sleeve

This kit is for a non e-locker differential.

The e-locker differential uses 2 different carrier bearings. 90366-75001 needs to be supplied for e-locker applications, or use the e-locker specific kit.

Kit Contents:
2x 90366-50007 - Carrier Bearings (83mm od)
1x 90366-35028 - Inner Pinion Bearing
1x 90366-30025 - Outer Pinion Bearing
1x 41231-24010 - Crush Sleeve
1x 90179-20001 - Pinion Nut = 20mm nut
1x 90311-38035 - Pinion Seal
1x 42181-60090 - Differential carrier gasket (subs from 42181-60040)

Note: Kit does not contain shims for setting pinion depth.
The pinion depth setting shim part numbers are:
T=thickness in mm:

90201-35497   OD=47, T=1.70
90201-35498   OD=47, T=1.73
90201-35499   OD=47, T=1.76
90201-35500   OD=47, T=1.79
90201-35501   OD=47, T=1.82
90201-35502   OD=47, T=1.85
90201-35503   OD=47, T=1.88
90201-35504   OD=47, T=1.91
90201-35505   OD=47, T=1.94
90201-35506   OD=47, T=1.97
90201-35507   OD=47, T=2.00
90201-35508   OD=47, T=2.03
90201-35509   OD=47, T=2.06
90201-35510   OD=47, T=2.09
90201-35511   OD=47, T=2.12
90201-35512   OD=47, T=2.15
90201-35513   OD=47, T=2.18
90201-35514   OD=47, T=2.21
90201-35515   OD=47, T=2.24, MARK 01
90201-35516   OD=47, T=2.27, MARK 02
90201-35517   OD=47, T=2.30, MARK 03
90201-35518   OD=47, T=2.33, MARK 04

Genuine Koyo bearings in kit

8482.20
2,985
2023 03 07