Swivel Hub/Knuckle Kit - Toyota Land Cruiser 80 Series, HZJ78, HZJ79, FZJ105, HZJ105, VDJ76 - DT-SH7

Swivel Hub/Knuckle Kit - Toyota Land Cruiser HZJ78, HZJ79, FZJ105, HZJ105, VDJ76

Also suits 80 Series Land Cruisers - read details below

Drivetech 4x4 pn:
DT-SH7

In a nutshell, this is exactly the same kit as one would use in an 80 Series with the exception of the supplied drive flange gaskets having the 10mm holes found in later models instead of 8mm holes found in 80 series and earlier models.

The Details: Why is this kit a great option for your 80 Series and what do you need to do to make it work with an 80 Series?
• All of the parts are the same except for the drive flange gaskets (43422-60060)
• This kit contains the spindle bushings and spindle bearings, which separately cost way more
• Comes with a non-e-locker front diff gasket and 2 drain/fill plug gaskets
--> to make this kit work with an 80, simply add 2 of: 43422-60060 Gasket, Front Outer Axle Flange

Wheel bearings are not included in the knuckle kits, but are available separately.
90080-36067 Outer Wheel Bearing - you will need 2 per axle
90368-49084 Inner Wheel Bearing - you will need 2 per axle

Recommended Grease is Moly Slip - you will need 4 tubs total to pack the wheel and trunion bearings, and for the birfields.

Kit Contents:

Knuckle Ball Wiper Seal/Felt & Retainer rings
43204-60031 Seal sub-assy, Steering knuckle (this is the knuckle ball seal kit)

• 4x 43241-60040 Cover, steering knuckle oil seal (metal retainers)
• 2x 43239-60030 Seal, steering knuckle oil, outer (felts)
• 2x 43238-60021 Seal, steering knuckle oil, inner (rubber wiper rings)
• 2x 43237-60040 Ring, steering knuckle oil seal, inner (split rings)

Trunion Bearings (aka knuckle bearings)
4x 90366-20003 Bearings (for steering knuckle arm)

2x 43435-60020 Gasket, knuckle spindle (octagonal gasket for spindle)
2x 43436-60011 Gasket, knuckle spindle oil retainer (under large dust seal)
2x 90313-93003 Seal, dust (dust seal for front axle hub to spindle)

Spindle Bearings
2x 90381-35001 Bush (for steering knuckle) (brass spindle bushing)
2x 90364-33011 Needle bearing for spindle

2x 90311-62001 Seal, Oil (wheel bearing seal)
2x 90310-35010 Seal, Oil T Type (for front drive shaft) (inner axle seal)
4x 43422-60070 Gasket, front axle outer shaft flange (multi hole gasket)
2x 43531-60010 Gasket, free wheel hub cover
2x 90215-42025 Washer, front wheel adjusting lock (“star” locking tab)

1x 42181-60090 Gasket, front differential carrier
2x 12157-10010 Gasket, drain fill & drain

The bearings are Koyo (OEM), Japan.
The remainder of the kit is all Japanese made parts.

8708.50
2,270
2022 11 15
DT-SH6
SH5 Kit