80 Series - HDJ80, HDJ81, HZJ80, HZJ81 FJ80, FZJ80

Knuckle /Trunion Bearing - Land Cruiser 70 & 80 series 09/1989 - up
Toyota pn:
90366-20003

ACL Duraglide 780 Tri-Metal Connecting Rod Bearings / Big End Bearings - for the Toyota 1PZ, 1HZ, 1HDT & 1HDFT
13041-17011 0.25mm
13204-17010
6B8396-0.25
ACL Duraglide 780 - Australia

Injector Washer/Seal Kit - Toyota Land Cruiser 1HZ engine (for 6 Injectors)
Kit Contents:
6x 11176-64010 Brass injector seat
6x 23654-64010 Aluminum Washer for leakage pipe
6x 11177-64010 Injection nozzle seat (small crush ring)

Intake Manifold Casket Set for the Toyota Land Cruiser 1PZ, 1HZ, 1HDT engines as found in the PZJ70, PZJ77, HZJ70, HZJ73, HZJ77, HDJ80, HDJ81.
There are 7 pieces in this kit:
1x 17171-17010
5x 17179-17010
1x 17115-17010

Left & Right Front Outer - Land Cruiser 80 - with front ABS BrakesToyota pn:
90947-02714
90947-02A16
Note: Does not fit non-ABS vehicles
Aftermarket

Wheel Bearing, Rear - SEMI-floating axle - Land Cruiser 40, 60, 70, 80 series
90365-47013
90368-47013
Koyo - Japan

Axle Seal (Wheel Bearing) - SEMI-floater rear - Land Cruiser 40, 60, 70, 80 series
Toyota pn:
90311-47001

Release Bearing, Clutch - Land Cruiser H55F & H151F Transmission and 1HZ or 1HDT engines
31230-60130
Toyota OEM (Nachi) - Japan

NLA - Pipe Assy, Turbo Oil Inlet - Toyota HDJ80, HDJ81 - 1HDT engine.
15407-17013
(15407-17011)
Toyota - Japan

Rear Lateral Control Arm/Panhard Rod Bushing - Upper & Lower - Land Cruiser 80 Series (2 req)
Toyota pn:
48706-60040
Toyota - Japan

Universal Joint - Land Cruiser 40, 55, 60, 70 & 80 Series - 64mm u-joint used from 1974 & up.
04371-36030
04371-60210
GMB - Japan

Lower Radiator Hose - Land Cruiser 80 Series HDJ81, HZJ81 w/1HZ, 1HDT engine 01/1990-10/1994
16572-17010
Genuine Toyota - Japan

Intake Manifold Gasket Intake to Pipe (hole cover) - Land Cruiser 1PZ, 1HZ, 1HDT. Toyota pn:
17115-17010

Toyota - Japan

Cone Washer for Land Cruiser & Hilux steering knuckle. Toyota calls this part “dowell, split (for steering knuckle arm)”
Toyota pn:
42323-60020

Seal, Injection Pump Drive Gear - Land Cruiser 1PZ, 1HZ, 1HDT, & 1KZT engines
90311-58006
Toyota - Japan

Steering Knuckle Stud - “hexalobular” (=has 6 point male torx at the top for tightening into place).
Toyota pn:
90126-12010 (current pn)
90126-12005
90116-12007
Toyota - Japan

Inner Axle Seal for Land Cruisers with the 8” high pinion front axle. 35x50x9.5mm
90310-35010
90310-35005
Toyota - Japan

Gasket, Starter Solenoid Cover - Denso Large Case off-set gear reduction starter motors
Toyota pn:
28175-56310
Toyota - Japan

1PZ, 1HZ, 1HDT, 1HDFT Rear Main Seal - Aftermarket
Toyota pn:
90311-95008
T1278
Musashi - Japan

Cover, Plastic Timing Belt - 1PZ, 1HZ (early), 1HDT
Toyota pn: 11321-17010

Oil Cooler - Toyota 1PZ, 1HZ, 1HDT, 1HDFT
Toyota pn:
15710-17010
15710-17011

Stud, Exhaust Turbo Turbine Housing - for CT26 turbos - 10x1.25x45mm
Toyota pn:
90116-10117
Toyota - Japan

Bolt, Ring Gear - Toyota 9.5" Differential
Toyota pn: 41226-35010

Dust Seal, Front Axle Hub - Land Cruiser 80 & Late 70 Series
Toyota pn: 90313-93003