|Article number:||IWKTO350A - Late 1HD-T|
|Availability:||In stock (8)|
The 1993 and later production 1HD-T engines received an updated piston design.
The changes were to the dimensions of the combustion chamber bowl in the piston. The volume of the combustion chamber remained the same, however.
This design change requires the use of different, thicker, injector washers than earlier 1HD-T engines to provide correct injector spacing.
Note: injector body o-rings to seal the injector to the cylinder head are not included in these kits. If you need these o-rings, then you can get them here: injector body o-ring, 96711-24019
6x 11176-17020 (injector seat)
12x 90201-08106 (washer for leak pipe)
2022 04 04