|Availability:||Out of stock|
Engine Kit prices may be subject to change without notice.
Read product description for important information.
These basic engine rebuild kits are typically supplied as a custom order request made up to suit the specific requirements of our client's request for parts.
Additional parts are recommended (see below) and are purchased separately from the basic engine kit.
The process begins with tearing down your engine and measuring each of the tolerances to determine what specific over and under sizes are required for items such as the engine bearings, pistons & rings, and any other parts. All parts that are at or very close to their specified wear limits should be replaced.
Note: Once you have your list, contact us and we will either order a kit in for you, or if we have the parts in stock put a kit together for you.
Piston Set (5) - Armour Grooved [Alfin inserts]
Piston Ring, Set
STD Rod Bearing, set
STD Main Bearings, set
STD Thrust Bearings, set
Piston Pin Bushings, semi-finished
Head Gasket (Gr. 3 or Gr. 5 available)
Engine Gasket Set (excluding head gasket)
STD Cam Bearings, set
Head Bolts, set
Liquid Gasket, 85gr tube
Fitment Pack (contains wipe down sheets, assembly lube and other helpful items)
Engine Bearing Sizes:
Main, connecting rod, and other bearings are available in non-standard sizes. Typically the Main and Connecting Rod bearings are available in 0.25mm, 0.50mm, 0.75mm and 1.00mm but please enquire once you are beyond 0.50mm as it can be more challenging to get these sizes.
Cam bearings, cam thrust bearings, Main Bearing thrust bearings are available in non-standard sizes, please enquire.
Pistons are typically available in 0.50mm and 1.00mm over sizes.
Rings are available to match.
Other parts to Consider:
Rod Bolts (strongly recommended)
Cylinder Head, with pre-combustion chambers, guides, studs
Intake & Exhaust Valves
1PZ (1HZ) Injection Washer, set
Timing Belt Tensioner Pulley
Timing Belt Hydraulic Tensioner
1PZ Clutch Kit
Freeze Plug Kit (available in Stainless Steel or Brass)
Crank Pulley Bolt
Vacuum Pump & PS Pump O-Rings (to seal to engine housings)
Engine kit parts are from various countries of origin including Japan, Australia, Spain, Taiwan.
All parts are excellent quality and have been subjected to engineering and quality control testing.
2023 10 05