2H, 12HT Water Pump - Toyota Land Cruiser 60 Series HJ60, HJ61 (pump cover + gasket) - Japan - 16120-69015

Water Pump - Toyota Land Cruiser 60 Series HJ60 & HJ61 with the 2H & 12HT engine.

Pump & gasket only, does not include the larger pump housing assembly that attaches to the engine.

Pro Tips: Water pump life is affected by factors such as coolant concentration and quality, belt tension, and operating environment and engine hours.

Coolant concentration in the cooling system should be at no less than 50% coolant, and 50% distilled water. We suggest using a 60/40 concentration since when an engine is flushed with clear water to remove the old coolant, some water is left behind that may reduce the effective concentration to below 50/50.

Coolant not only prevents overheating, it also provides lubrication for the water pump and has corrosion inhibitors in it to reduce internal engine corrosion and electrolysis as well as premature gasket failures (where gaskets are exposed to coolant - such as the cylinder head gasket).

Also, replace your rad cap at the same time... it's cheap insurance against overheating. You would not believe the number of original rad caps I have seen that are still on Land Cruisers from the 1970s and 1980s... that have long since stopped operating properly.

Items included - Toyota pn:
16120-69015 Water pump cover assembly - this is the pump itself as in the product photo
16129-68010 Water pump cover assembly gasket - included gasket is not shown in the product photo

GMB or NPW - Made in Japan

8413.30
2021 11 22

2H water pump HJ60
12HT water pump HJ61