Thrust/Claw Lock Washer, Spindle Bearing, Front Outer - Land Cruiser 09/1975-on - 90214-42030

This kit replaces the two 54mm nuts, the thrust washer, and the locking tab (aka: ‘star washer’) on Toyota Live Front Axles.
Kit Contents:
1x “Star” lock Washer 90215-42025
1x Thrust “Claw” Washer 90214-42030
2x 54mm Spindle Nuts 43521-60011

Lock Washer/Tab, Axle Hub (star washer) - Land Cruiser All Models from 1976-on
Toyota pn:
90215-42025

Tool, Hub Nut Socket 54mm (Toyota 55 mm)
Made in India

Tool - Hub Socket, Rear (three pin) - 60, 70 & 80 series FF rear end
09509-25011
Toyota - Japan

For front and rear locking hubs, drive plates, and rear full floating axle shafts that use 8.0mm hub studs. Hub Stud Kit:
1x 8x1.25mm Stud
1x 8x1.25mm Nut
1x 8mm Lock Washer
1x Cone Washer

Toyota pn: 90116-08325
Made in Japan by Joint Fuji

Nut for Steering Knuckle Stud, drun brake backing plate & other high strength applications. Land Cruiser, Hilux & othersM10x1.25
Toyota pn:
94115-71200 plated
Toyota - Japan

Washer, Flat (M10) - Toyota Land Cruiser steering knuckle stud.
High strength flat washer.
Toyota pn:
90201-12019
Toyota - Japan

Cone Washer for Land Cruiser & Hilux steering knuckle. Toyota calls this part “dowell, split (for steering knuckle arm)”
Toyota pn:
42323-60020

Steering Knuckle Stud - “hexalobular” (=has 6 point male torx at the top for tightening into place).
Toyota pn:
90126-12010 (current pn)
90126-12005
90116-12007
Toyota - Japan