Nitro Gear - Land Cruiser 4.10 Ring & Pinion Differential Gears with Master Install Kit (45mm) TLC-410-NG + MKTLC-A

3.73 Ring & Pinion Gear Set - Toyota Land Cruiser 8” High Pinion Differential
These are the alternative higher ratio for Land Cruiser 80 Series with high pinion 8” differentials.
41201-69226
OEM - Made in Japan

3.73 Ring & Pinion Gear Set - Toyota Land Cruiser 9.5” Differential (1990-on)
Made in Japan

Note that the inner dimension of 45mm does not work with new generation ARB Air Lockers which now use an inner dimension of 50mm.

Fits the front & rear differentials that are 9.5” and some front diffs in the 8” high pinion configuration - there are two sizes for the fronts: 80mm outer dia., and 83mm outer dia.The 83mm outer diamter is the 90366-50007 bearing and not this one.

Koyo

Crush Sleeve - Land Cruiser 9.5" differentials
Toyota pn:
41231-60020
41231-60030

Diff Bearing kit 9.5" w/Locker
Land Cruiser with Factory Locker (e-locker, cable locker) 30mm pinion

Diff Bearing Kit - Land Cruiser 9.5" non-locker w/crush sleeve
Koyo Bearings

Diff Bearing Kit - Land Cruiser 9.5" non-locker w/crush sleeve & 50mm bearings (1990-on)
Koyo Bearings

Pinion Seal for Land Cruiser, Hilux, 4Runner 9.5” & 8” differentials.
38x74x11-19mm
90311-38047 - Toyota
Toyota OEM - NOK Japan