Birfield CV Axle, Land Cruiser 80 Series - non-ABS 43405-60080

Replacement Birfield CV Axles for the Land Cruiser 80 Series. Non-ABS.

These are the later versions with the longer splined section that replace the early short splined versions that were prone to premature spline/drive flange wear.

Toyota pn:
43405-60080 non-ABS (246.5mm)

Note: Use a high quality Moly fortified grease such as Moly Slip brand Moly Grease when installing these parts.

• Regular grease is not acceptable, and if used may promote rapid wear and premature failure.
• Do Not mix different grease of different types together.

Please note that NEW drive Flanges must be installed with new birfields when being replaced/upgraded due to worn splines. pn: 43421-60040 / 041-100500

Old, worn drive flanges will cause rapid and premature failure of the new birfield splines (and vice versa). Also, the early (short) birfields, use a different, shorter, drive flange - we no longer stock the short splined Birfields, but we can order them for you.

Engineered in Australia - Made in Taiwan

*does not ship with the grease packet shown in the photo

8708.50
3.62,26.13.13
2021 03 09