| Article number: |
DT-Trans1 |
| Availability: |
In stock
(1)
|
Transfer Case Rebuild Kit for the older style J30 one-piece Aluminum Transfer Case
As found behind the 3-speed and very early 4-speed Land Cruiser Transmissions.
Kit Contents:
- 2x 30307JR-4 Tapered Roller Bearings - Koyo
- 1x 63/32NRC3 Ball Bearing with snap ring - Koyo
- 1x 6306CM Ball Bearing - Koyo
- 2x 25VP3332-1 Needle Bearing (for idler shaft) - Koyo
- 1x Mainshaft Needle Bearing - Koyo
- 1x Transfer Case input seal AE24931 - NOK
- 1x Front Output shaft seal
- 1x Rear Output shaft seal
- 2x Idler Shaft Thrust Washers
- 1x Idler Shaft - Japan
- 3x Stake nuts for input & output shafts
- 1x 4WD shifter shaft boot
- 2x Seals - Speedo Drive
- 1x Paper Gasket Kit
- 1x Hardware Kit - copper washers, felt washers, drain plug gaskets, cotter pins, rubber o-rings
Made in Japan
8708.40
2020 08 03
transfer case bearing kit, bearing kit transfer case, transfer case kit, transfer case rebuild
