Nut, Lock Washer Based (stover) - M8x1.25mm - for Turbo Oil Supply & Drain - 94180-40800

Nut for Steering Knuckle Stud, drun brake backing plate & other high strength applications. Land Cruiser, Hilux & othersM10x1.25
Toyota pn:
94115-71200 plated
Toyota - Japan

For front and rear locking hubs, drive plates, and rear full floating axle shafts that use 8.0mm hub studs. Hub Stud Kit:
1x 8x1.25mm Stud
1x 8x1.25mm Nut
1x 8mm Lock Washer
1x Cone Washer

Toyota pn: 90116-08325
Made in Japan by Joint Fuji

Oil drain pipe, gaskets and hardware for the turbo oil drain pipe (15407-17013 or 15407-17011)
12 pieces in the kit
Genuine Toyota parts

Exhaust Manifold Stud w/Nut - Toyota 2H & 12HT
90116-08222 + 90179-08012
Toyota - Japan

Stud & Nut - Intake Manifold - Toyota 1HZ, 1HDT, 1HDFT (12 Req.)
Toyota pn:
90109-08188
90179-08040

Exhaust Manifold Stud, Hexalobular M10x1.25mm
Toyota pn:
90116-10171
Toyota - Japan

Nut, Exhaust Manifold 10x1.25mm - self-locking (stover type)
Toyota pn:
90179-10128