A/C O-ring seal kit for Japanese vehicles
Seal kit for repairing leaking AC systems on Japanese market vehicles.
This is a general kit that covers most applications, and is very handy to have when working on you air conditioning system.
| Article number: | 1KZ AC Compressor |
| Availability: | In stock (2) |
This compressor is a replacement for Denso 10PA15C, and includes the clutch & pulley.
This is a 15C Series compressor with the correct pulley and spacing for a 1KZ engine as equipped in the KZJ71, KZJ78 and related models.
This compressor can also be used on earlier LJ71, LJ78, and LN series Hilux vehicles that have been converted by a properly equipped AC Tech from R12 to use R134a (or R12a replacement refrigerant).
• This compressor is pre-filled with PAG Oil for use with R134a.
• This compressor is NOT compatible with R12 systems.
• Note that earlier Prado models such as the LJ71 and LJ78 will need the system cleaned and then converted to use R134a refrigerant if it was originally using R12.
•• Do not mix PAG Oil and Mineral Oil as in older R12 based systems found on many JDMs as they are incompatible and your compressor will fail (no warranty!).
• Pulley diameter is 143mm
• Pulley center to the center of front upper bolt hole is 85mm
Toyota pns:
88320-60500 = compressor
88410-22480 = clutch assembly
There are a number of other part numbers that may refer to this compressor as it is widely used on L (2L, 2LT, 2LT-E, KZ (1KZT, 1KZT-E) and other engine series and vehicles.
Denso - Japan
8415.20
A/C Compressor
6,890 28.20.19,5
8832060500
8841022480
