|Availability:||Out of stock|
Pro Tip: If you have a crush sleeve style differential, it is a requirement to replace the crush sleeve when replacing the pinion seal.
It is very difficult to get the pinion preload correct when doing this in place - be very careful, and use very little preload with used bearings.
Over-tightening the bearing preload will lead to rapid pinion bearing failure.
90311-38047 also subs from these part numbers:
98168 - Kelpro
082-022395 - Drivetech4x4
NB: There are several different seals in the later production years for the Land Cruiser and other models when the pinion size & spline count was increased - check your part numbers carefully to ensure you are purchasing the correct seal.
90311-41009 = 41mm ID
90311-45028 = 45mm ID
Kelpro (Motospecs) - Taiwan